Have you ever experienced such situation that you failed to boot the operating system when you started the power of computer? Or are you annoying by the failure of booting Microsoft Windows Xp properly even you have restarted the computer time and time again? Find three tips here to fix common Windows Xp Startup Problems with a few of easy steps. By following these 3 ways, you will resolve the startup problems without any guide of PC experts or technicians.

1.Use Windows Startup Disk to fix Windows Xp Startup Problems.

If the startup problem is caused by the broken booting record of activity partition or damaged files for starting operating system, a startup disk would solve this problem easily:

A.To create a Windows XP boot disk. When try formatting a floppy disk, you would have the option of creating a MS-DOS startup disk, follow the below steps to do this. 1. Place diskette into the computer. 2. Open My Computer, right-click the A: drive and click Format. 3. In the Format window, check Create an MS-DOS startup disk. 4. Click Start.

B. Use this boot disk to start Windows System Once the bootable diskette has been successfully created, following the below steps you will be able to boot from the diskette.

1.Place the diskette into write-protect mode.2.Insert the diskette into the computer and reset or turn on the computer to begin the boot process. 3.As the computer is booting, answer the questions prompted. 4.Once at the A :> take the appropriate actions depending upon the situation of the computer. 5.Restart your computer one more time.

2.Use Last Known Good Configuration to fix Windows Xp Startup Problems.

Using Last Known Good Configuration to boot operating system is also a usual method to get into the Windows Xp. Last Known Good Configuration is a Windows startup option which uses the most recent system settings that worked properly. Every time you turn your computer off and Windows shuts down successfully, important system settings will be saved in the registry automatically. And this operation will cancel any modification and changed you had made before on the registry key code– “CurrentControlSet” which is used to define hardware and drivers settings. Purpose of using Last Known Good Configuration is to replace the current registry key by the former one so that you can start operating system normally with the correct registry. Follow this instruction to start up system using Last Known Good Configuration:

Press Ctrl+Alt+Delete to restart your computer. When you see the words: “Please select the operating system to start” appears on the screen or hear a short beep from computer, press and hold the F8 key before the Windows logo appears. Then on the Advanced Boot Options screen, use the arrow keys to highlight Last Known Good Configuration, and then press ENTER. Warning: you have only one chance to use Last Known Good Configuration.

3.Use System Restore to fix Windows Xp Startup Problems.

Another tool which can help you start Windows system is “system restore” function. As a service running on the backstage, System Restore helps PC users recover system files, registry keys, installed programs, etc. to a previous state in the event of malfunctioning or failure and meanwhile monitors any changes of important system components persistently. System Restore will create a backup copy for those important components(known as restore point)when it detects some changes would be occurred on them. In addition, System Restore will create the restore point every 24 hours automatically. Follow this instruction to start up system using System Restore:

Press Ctrl+Alt+Delete to restart your computer at first. When you see the words: “Please select the operating system to start” appears on the screen or hear a short beep from computer, press and hold the F8 key before the Windows logo appears. Then on the Advanced Boot Options screen, use the arrow keys to select “Safe Mode”. Press “start” button after entering the “safe mode” to choose All Programs, Accessories, System Tools Menu and then click System Restore. Click “Next” to select a restore point then start system restore mission.

Furthermore, we’d better take some preventive measures to backup registry of system with some registry tools in order to restore the important registry in the event of Windows Startup Problems being occurred. When those problems appear you can use registry backup program to have them fix.

To fix Windows Xp startup problems, I recommend you try to use registry cleaners to maintian your computer regularly. Registry Easy is my best and personal choice while you can click here to free download it with a few of seconds.

Tried everything to boot your Windows based system, but it is still unbootable? Unable to find out the exact cause for unbootability of your system? The most obvious cause for the above scenarios is severe damage in file system. In most cases of file system corruption, a Windows user encounters a boot error message that does not allow him/her to access the data saved in the hard drive. Few major causes of corruption in file system are improper system shutdown, virus attack, application malfunction, and operating system damage. These scenarios can be easily surmounted if the user has created an adequate backup of all his hard drive data. However, in the absence of an updated backup, the user needs to opt for powerful Data Recovery solutions.

Consider, while trying to boot your Windows Vista based system, you receive an error message :

“windows failed to startup properly, a resent hardware or software change might be the cause.”

The moment the above error message pops up, the booting process stops, rendering to inaccessibility of hard drive data.

Cause:

Damage in Windows file system.

Resolution:

To resolve the above error message, you will need to boot your system using ‘Startup Repair’ option. However, there is a possibility that this option may fail to boot and display the below error message:

“startup repair cannot repair this computer automatically.”

In such cases, if you wish to boot your system, then you can:

Perform a system restore to a particular restore point.

Use Windows Memory Diagnostic Tool to boot your system.

Run CHKDSK command.

Format and re-install Windows Vista operating system.

Re-installation will surmount the above error message and allow you to boot the system. Though the system becomes bootable, all the previously saved hard drive data becomes inaccessible. To access that data, you will need to opt for effective Data Recovery Software. Such data recovery tools scan a formatted Windows based hard drive and recoup all lost files.

Windows Data Recovery Software recovers all lost files post formatting. The Data Recovery application performs recovery in three simple steps. Compatible with FAT12, FAT16, FAT32, VFAT, NTFS and NTFS5 file systems, the recovery tool supports recovery of 185 different file types. It is designed for Windows 7, Vista, XP, 2003, and 2000.

There are many ways by which logical corruption in Windows Vista can occur. In most cases, the operating system becomes un bootable, leading to inaccessibility of data saved in your hard drive. Understanding the criticality of your data, Microsoft has embedded a powerful feature in Windows operating system, ‘Startup Repair’, to overcome all kinds of Windows booting and data inaccessibility problems. This feature can be accessed from ‘System Recovery Options’ or can also be installed on your hard drive. While the feature is useful in repairing most of the file system corruption problems, there is a possibility that it fails to repair your operating system and the data saved in your hard drive remains inaccessible. In such cases, if you want to access your hard drive data, then you need to restore the files using an updated data backup. But, with inaccessibility of an updated backup, you need to use an advanced disk recovery application.

Consider a practical case, where you encounter the below error message while trying to boot your Windows Vista based system:

“no bootable devices, please insert boot cd and press any key”

To overcome the message, when you run Startup Repair, you encounter another error message stating that your system can not be repaired using this feature:

“Problem Event: Startup RepairV2Problem Signature 01: External MediaProblem Signature 02: 6.0.6000.16386.0.0.0.0Problem Signature 03: 0Problem Signature 04: 65537Problem Signature 05: UnknownProblem Signature 06: Bad DiskProblem Signature 07: 0Problem Signature 08: 0Problem Signature 09: UnknownProblem Signature 10: 1168OS Version: 6.0.6000.2.0.0.256.1Locale ID: 1033″

After the above error message pops up, your hard drive data becomes inaccessible.

Resolution:

In case the Startup Repair option fails to repair, the next best option is to reinstall Windows Vista operating system. Though this option allows you to boot your system, it also deletes the data saved on your Windows Vista based hard drive. To access the deleted data post formatting, you need to search for a third-party disk recovery utility. Such hard disk recovery use powerful techniques to recover formatted data and to restore it at required location.

Stellar Phoenix Windows Data Recovery supports complete formatted data recovery from FAT12, FAT16, FAT32, VFAT , NTFS and NTFS5 file system based partitions. The disk recovery software can be installed on Windows 7, Vista, XP, 2003, and 2000. It supports recovery from all kinds of storage media, including memory cards, digital cameras, etc.